This is automake.info, produced by Makeinfo version 3.12b from automake.texi. INFO-DIR-SECTION GNU admin START-INFO-DIR-ENTRY * automake: (automake). Making Makefile.in's END-INFO-DIR-ENTRY INFO-DIR-SECTION Individual utilities START-INFO-DIR-ENTRY * aclocal: (automake)Invoking aclocal. Generating aclocal.m4 END-INFO-DIR-ENTRY This file documents GNU automake 1.4 Copyright (C) 1995, 96, 97, 98 Free Software Foundation, Inc. Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are preserved on all copies. Permission is granted to copy and distribute modified versions of this manual under the conditions for verbatim copying, provided that the entire resulting derived work is distributed under the terms of a permission notice identical to this one. Permission is granted to copy and distribute translations of this manual into another language, under the above conditions for modified versions, except that this permission notice may be stated in a translation approved by the Foundation.  File: automake.info, Node: Top, Next: Introduction, Prev: (dir), Up: (dir) GNU Automake ************ This file documents the GNU Automake package for creating GNU Standards-compliant Makefiles from template files. This edition documents version 1.4. * Menu: * Introduction:: Automake's purpose * Generalities:: General ideas * Examples:: Some example packages * Invoking Automake:: Creating a Makefile.in * configure:: Scanning configure.in * Top level:: The top-level Makefile.am * Programs:: Building programs and libraries * Other objects:: Other derived objects * Other GNU Tools:: Other GNU Tools * Documentation:: Building documentation * Install:: What gets installed * Clean:: What gets cleaned * Dist:: What goes in a distribution * Tests:: Support for test suites * Options:: Changing Automake's behavior * Miscellaneous:: Miscellaneous rules * Include:: Including extra files in an Automake template. * Conditionals:: Conditionals * Gnits:: The effect of `--gnu' and `--gnits' * Cygnus:: The effect of `--cygnus' * Extending:: Extending Automake * Distributing:: Distributing the Makefile.in * Future:: Some ideas for the future * Macro and Variable Index:: * General Index::  File: automake.info, Node: Introduction, Next: Generalities, Prev: Top, Up: Top Introduction ************ Automake is a tool for automatically generating `Makefile.in's from files called `Makefile.am'. Each `Makefile.am' is basically a series of `make' macro definitions (with rules being thrown in occasionally). The generated `Makefile.in's are compliant with the GNU Makefile standards. The GNU Makefile Standards Document (*note Makefile Conventions: (standards)Makefile Conventions.) is long, complicated, and subject to change. The goal of Automake is to remove the burden of Makefile maintenance from the back of the individual GNU maintainer (and put it on the back of the Automake maintainer). The typical Automake input file is simply a series of macro definitions. Each such file is processed to create a `Makefile.in'. There should generally be one `Makefile.am' per directory of a project. Automake does constrain a project in certain ways; for instance it assumes that the project uses Autoconf (*note Introduction: (autoconf)Top.), and enforces certain restrictions on the `configure.in' contents. Automake requires `perl' in order to generate the `Makefile.in's. However, the distributions created by Automake are fully GNU standards-compliant, and do not require `perl' in order to be built. Mail suggestions and bug reports for Automake to .  File: automake.info, Node: Generalities, Next: Examples, Prev: Introduction, Up: Top General ideas ************* The following sections cover a few basic ideas that will help you understand how Automake works. * Menu: * General Operation:: General operation of Automake * Depth:: The kinds of packages * Strictness:: Standards conformance checking * Uniform:: The Uniform Naming Scheme * Canonicalization:: How derived variables are named  File: automake.info, Node: General Operation, Next: Depth, Prev: Generalities, Up: Generalities General Operation ================= Automake works by reading a `Makefile.am' and generating a `Makefile.in'. Certain macros and targets defined in the `Makefile.am' instruct Automake to generate more specialized code; for instance, a `bin_PROGRAMS' macro definition will cause targets for compiling and linking programs to be generated. The macro definitions and targets in the `Makefile.am' are copied verbatim into the generated file. This allows you to add arbitrary code into the generated `Makefile.in'. For instance the Automake distribution includes a non-standard `cvs-dist' target, which the Automake maintainer uses to make distributions from his source control system. Note that GNU make extensions are not recognized by Automake. Using such extensions in a `Makefile.am' will lead to errors or confusing behavior. Automake tries to group comments with adjoining targets and macro definitions in an intelligent way. A target defined in `Makefile.am' generally overrides any such target of a similar name that would be automatically generated by `automake'. Although this is a supported feature, it is generally best to avoid making use of it, as sometimes the generated rules are very particular. Similarly, a macro defined in `Makefile.am' will override any definition of the macro that `automake' would ordinarily create. This feature is more often useful than the ability to override a target definition. Be warned that many of the macros generated by `automake' are considered to be for internal use only, and their names might change in future releases. When examining a macro definition, Automake will recursively examine macros referenced in the definition. For example, if Automake is looking at the content of `foo_SOURCES' in this snippet xs = a.c b.c foo_SOURCES = c.c $(xs) it would use the files `a.c', `b.c', and `c.c' as the contents of `foo_SOURCES'. Automake also allows a form of comment which is _not_ copied into the output; all lines beginning with `##' are completely ignored by Automake. It is customary to make the first line of `Makefile.am' read: ## Process this file with automake to produce Makefile.in  File: automake.info, Node: Depth, Next: Strictness, Prev: General Operation, Up: Generalities Depth ===== `automake' supports three kinds of directory hierarchy: `flat', `shallow', and `deep'. A "flat" package is one in which all the files are in a single directory. The `Makefile.am' for such a package by definition lacks a `SUBDIRS' macro. An example of such a package is `termutils'. A "deep" package is one in which all the source lies in subdirectories; the top level directory contains mainly configuration information. GNU `cpio' is a good example of such a package, as is GNU `tar'. The top level `Makefile.am' for a deep package will contain a `SUBDIRS' macro, but no other macros to define objects which are built. A "shallow" package is one in which the primary source resides in the top-level directory, while various parts (typically libraries) reside in subdirectories. Automake is one such package (as is GNU `make', which does not currently use `automake').  File: automake.info, Node: Strictness, Next: Uniform, Prev: Depth, Up: Generalities Strictness ========== While Automake is intended to be used by maintainers of GNU packages, it does make some effort to accommodate those who wish to use it, but do not want to use all the GNU conventions. To this end, Automake supports three levels of "strictness"--the strictness indicating how stringently Automake should check standards conformance. The valid strictness levels are: `foreign' Automake will check for only those things which are absolutely required for proper operations. For instance, whereas GNU standards dictate the existence of a `NEWS' file, it will not be required in this mode. The name comes from the fact that Automake is intended to be used for GNU programs; these relaxed rules are not the standard mode of operation. `gnu' Automake will check--as much as possible--for compliance to the GNU standards for packages. This is the default. `gnits' Automake will check for compliance to the as-yet-unwritten "Gnits standards". These are based on the GNU standards, but are even more detailed. Unless you are a Gnits standards contributor, it is recommended that you avoid this option until such time as the Gnits standard is actually published. For more information on the precise implications of the strictness level, see *Note Gnits::.  File: automake.info, Node: Uniform, Next: Canonicalization, Prev: Strictness, Up: Generalities The Uniform Naming Scheme ========================= Automake macros (from here on referred to as _variables_) generally follow a "uniform naming scheme" that makes it easy to decide how programs (and other derived objects) are built, and how they are installed. This scheme also supports `configure' time determination of what should be built. At `make' time, certain variables are used to determine which objects are to be built. These variables are called "primary variables". For instance, the primary variable `PROGRAMS' holds a list of programs which are to be compiled and linked. A different set of variables is used to decide where the built objects should be installed. These variables are named after the primary variables, but have a prefix indicating which standard directory should be used as the installation directory. The standard directory names are given in the GNU standards (*note Directory Variables: (standards)Directory Variables.). Automake extends this list with `pkglibdir', `pkgincludedir', and `pkgdatadir'; these are the same as the non-`pkg' versions, but with `@PACKAGE@' appended. For instance, `pkglibdir' is defined as `$(datadir)/@PACKAGE@'. For each primary, there is one additional variable named by prepending `EXTRA_' to the primary name. This variable is used to list objects which may or may not be built, depending on what `configure' decides. This variable is required because Automake must statically know the entire list of objects that may be built in order to generate a `Makefile.in' that will work in all cases. For instance, `cpio' decides at configure time which programs are built. Some of the programs are installed in `bindir', and some are installed in `sbindir': EXTRA_PROGRAMS = mt rmt bin_PROGRAMS = cpio pax sbin_PROGRAMS = @PROGRAMS@ Defining a primary variable without a prefix (e.g. `PROGRAMS') is an error. Note that the common `dir' suffix is left off when constructing the variable names; thus one writes `bin_PROGRAMS' and not `bindir_PROGRAMS'. Not every sort of object can be installed in every directory. Automake will flag those attempts it finds in error. Automake will also diagnose obvious misspellings in directory names. Sometimes the standard directories--even as augmented by Automake-- are not enough. In particular it is sometimes useful, for clarity, to install objects in a subdirectory of some predefined directory. To this end, Automake allows you to extend the list of possible installation directories. A given prefix (e.g. `zar') is valid if a variable of the same name with `dir' appended is defined (e.g. `zardir'). For instance, until HTML support is part of Automake, you could use this to install raw HTML documentation: htmldir = $(prefix)/html html_DATA = automake.html The special prefix `noinst' indicates that the objects in question should not be installed at all. The special prefix `check' indicates that the objects in question should not be built until the `make check' command is run. Possible primary names are `PROGRAMS', `LIBRARIES', `LISP', `SCRIPTS', `DATA', `HEADERS', `MANS', and `TEXINFOS'.  File: automake.info, Node: Canonicalization, Prev: Uniform, Up: Generalities How derived variables are named =============================== Sometimes a Makefile variable name is derived from some text the user supplies. For instance, program names are rewritten into Makefile macro names. Automake canonicalizes this text, so that it does not have to follow Makefile macro naming rules. All characters in the name except for letters, numbers, and the underscore are turned into underscores when making macro references. For example, if your program is named `sniff-glue', the derived variable name would be `sniff_glue_SOURCES', not `sniff-glue_SOURCES'.  File: automake.info, Node: Examples, Next: Invoking Automake, Prev: Generalities, Up: Top Some example packages ********************* * Menu: * Complete:: A simple example, start to finish * Hello:: A classic program * etags:: Building etags and ctags  File: automake.info, Node: Complete, Next: Hello, Prev: Examples, Up: Examples A simple example, start to finish ================================= Let's suppose you just finished writing `zardoz', a program to make your head float from vortex to vortex. You've been using Autoconf to provide a portability framework, but your `Makefile.in's have been ad-hoc. You want to make them bulletproof, so you turn to Automake. The first step is to update your `configure.in' to include the commands that `automake' needs. The simplest way to do this is to add an `AM_INIT_AUTOMAKE' call just after `AC_INIT': AM_INIT_AUTOMAKE(zardoz, 1.0) Since your program doesn't have any complicating factors (e.g., it doesn't use `gettext', it doesn't want to build a shared library), you're done with this part. That was easy! Now you must regenerate `configure'. But to do that, you'll need to tell `autoconf' how to find the new macro you've used. The easiest way to do this is to use the `aclocal' program to generate your `aclocal.m4' for you. But wait... you already have an `aclocal.m4', because you had to write some hairy macros for your program. The `aclocal' program lets you put your own macros into `acinclude.m4', so simply rename and then run: mv aclocal.m4 acinclude.m4 aclocal autoconf Now it is time to write your `Makefile.am' for `zardoz'. Since `zardoz' is a user program, you want to install it where the rest of the user programs go. Additionally, `zardoz' has some Texinfo documentation. Your `configure.in' script uses `AC_REPLACE_FUNCS', so you need to link against `@LIBOBJS@'. So here's what you'd write: bin_PROGRAMS = zardoz zardoz_SOURCES = main.c head.c float.c vortex9.c gun.c zardoz_LDADD = @LIBOBJS@ info_TEXINFOS = zardoz.texi Now you can run `automake --add-missing' to generate your `Makefile.in' and grab any auxiliary files you might need, and you're done!  File: automake.info, Node: Hello, Next: etags, Prev: Complete, Up: Examples A classic program ================= GNU hello (ftp://prep.ai.mit.edu/pub/gnu/hello-1.3.tar.gz) is renowned for its classic simplicity and versatility. This section shows how Automake could be used with the GNU Hello package. The examples below are from the latest beta version of GNU Hello, but with all of the maintainer-only code stripped out, as well as all copyright comments. Of course, GNU Hello is somewhat more featureful than your traditional two-liner. GNU Hello is internationalized, does option processing, and has a manual and a test suite. GNU Hello is a deep package. Here is the `configure.in' from GNU Hello: dnl Process this file with autoconf to produce a configure script. AC_INIT(src/hello.c) AM_INIT_AUTOMAKE(hello, 1.3.11) AM_CONFIG_HEADER(config.h) dnl Set of available languages. ALL_LINGUAS="de fr es ko nl no pl pt sl sv" dnl Checks for programs. AC_PROG_CC AC_ISC_POSIX dnl Checks for libraries. dnl Checks for header files. AC_STDC_HEADERS AC_HAVE_HEADERS(string.h fcntl.h sys/file.h sys/param.h) dnl Checks for library functions. AC_FUNC_ALLOCA dnl Check for st_blksize in struct stat AC_ST_BLKSIZE dnl internationalization macros AM_GNU_GETTEXT AC_OUTPUT([Makefile doc/Makefile intl/Makefile po/Makefile.in \ src/Makefile tests/Makefile tests/hello], [chmod +x tests/hello]) The `AM_' macros are provided by Automake (or the Gettext library); the rest are standard Autoconf macros. The top-level `Makefile.am': EXTRA_DIST = BUGS ChangeLog.O SUBDIRS = doc intl po src tests As you can see, all the work here is really done in subdirectories. The `po' and `intl' directories are automatically generated using `gettextize'; they will not be discussed here. In `doc/Makefile.am' we see: info_TEXINFOS = hello.texi hello_TEXINFOS = gpl.texi This is sufficient to build, install, and distribute the GNU Hello manual. Here is `tests/Makefile.am': TESTS = hello EXTRA_DIST = hello.in testdata The script `hello' is generated by `configure', and is the only test case. `make check' will run this test. Last we have `src/Makefile.am', where all the real work is done: bin_PROGRAMS = hello hello_SOURCES = hello.c version.c getopt.c getopt1.c getopt.h system.h hello_LDADD = @INTLLIBS@ @ALLOCA@ localedir = $(datadir)/locale INCLUDES = -I../intl -DLOCALEDIR=\"$(localedir)\"  File: automake.info, Node: etags, Prev: Hello, Up: Examples Building etags and ctags ======================== Here is another, trickier example. It shows how to generate two programs (`ctags' and `etags') from the same source file (`etags.c'). The difficult part is that each compilation of `etags.c' requires different `cpp' flags. bin_PROGRAMS = etags ctags ctags_SOURCES = ctags_LDADD = ctags.o etags.o: etags.c $(COMPILE) -DETAGS_REGEXPS -c etags.c ctags.o: etags.c $(COMPILE) -DCTAGS -o ctags.o -c etags.c Note that `ctags_SOURCES' is defined to be empty--that way no implicit value is substituted. The implicit value, however, is used to generate `etags' from `etags.o'. `ctags_LDADD' is used to get `ctags.o' into the link line. `ctags_DEPENDENCIES' is generated by Automake. The above rules won't work if your compiler doesn't accept both `-c' and `-o'. The simplest fix for this is to introduce a bogus dependency (to avoid problems with a parallel `make'): etags.o: etags.c ctags.o $(COMPILE) -DETAGS_REGEXPS -c etags.c ctags.o: etags.c $(COMPILE) -DCTAGS -c etags.c && mv etags.o ctags.o Also, these explicit rules do not work if the de-ANSI-fication feature is used (*note ANSI::.). Supporting de-ANSI-fication requires a little more work: etags._o: etags._c ctags.o $(COMPILE) -DETAGS_REGEXPS -c etags.c ctags._o: etags._c $(COMPILE) -DCTAGS -c etags.c && mv etags._o ctags.o  File: automake.info, Node: Invoking Automake, Next: configure, Prev: Examples, Up: Top Creating a `Makefile.in' ************************ To create all the `Makefile.in's for a package, run the `automake' program in the top level directory, with no arguments. `automake' will automatically find each appropriate `Makefile.am' (by scanning `configure.in'; *note configure::.) and generate the corresponding `Makefile.in'. Note that `automake' has a rather simplistic view of what constitutes a package; it assumes that a package has only one `configure.in', at the top. If your package has multiple `configure.in's, then you must run `automake' in each directory holding a `configure.in'. You can optionally give `automake' an argument; `.am' is appended to the argument and the result is used as the name of the input file. This feature is generally only used to automatically rebuild an out-of-date `Makefile.in'. Note that `automake' must always be run from the topmost directory of a project, even if being used to regenerate the `Makefile.in' in some subdirectory. This is necessary because `automake' must scan `configure.in', and because `automake' uses the knowledge that a `Makefile.in' is in a subdirectory to change its behavior in some cases. `automake' accepts the following options: `-a' `--add-missing' Automake requires certain common files to exist in certain situations; for instance `config.guess' is required if `configure.in' runs `AC_CANONICAL_HOST'. Automake is distributed with several of these files; this option will cause the missing ones to be automatically added to the package, whenever possible. In general if Automake tells you a file is missing, try using this option. By default Automake tries to make a symbolic link pointing to its own copy of the missing file; this can be changed with `--copy'. `--amdir=DIR' Look for Automake data files in directory DIR instead of in the installation directory. This is typically used for debugging. `--build-dir=DIR' Tell Automake where the build directory is. This option is used when including dependencies into a `Makefile.in' generated by `make dist'; it should not be used otherwise. `-c' `--copy' When used with `--add-missing', causes installed files to be copied. The default is to make a symbolic link. `--cygnus' Causes the generated `Makefile.in's to follow Cygnus rules, instead of GNU or Gnits rules. For more information, see *Note Cygnus::. `--foreign' Set the global strictness to `foreign'. For more information, see *Note Strictness::. `--gnits' Set the global strictness to `gnits'. For more information, see *Note Gnits::. `--gnu' Set the global strictness to `gnu'. For more information, see *Note Gnits::. This is the default strictness. `--help' Print a summary of the command line options and exit. `-i' `--include-deps' Include all automatically generated dependency information (*note Dependencies::.) in the generated `Makefile.in'. This is generally done when making a distribution; see *Note Dist::. `--generate-deps' Generate a file concatenating all automatically generated dependency information (*note Dependencies::.) into one file, `.dep_segment'. This is generally done when making a distribution; see *Note Dist::. It is useful when maintaining a `SMakefile' or makefiles for other platforms (`Makefile.DOS', etc.) It can only be used in conjunction with `--include-deps', `--srcdir-name', and `--build-dir'. Note that if this option is given, no other processing is done. `--no-force' Ordinarily `automake' creates all `Makefile.in's mentioned in `configure.in'. This option causes it to only update those `Makefile.in's which are out of date with respect to one of their dependents. `-o DIR' `--output-dir=DIR' Put the generated `Makefile.in' in the directory DIR. Ordinarily each `Makefile.in' is created in the directory of the corresponding `Makefile.am'. This option is used when making distributions. `--srcdir-name=DIR' Tell Automake the name of the source directory associated with the current build. This option is used when including dependencies into a `Makefile.in' generated by `make dist'; it should not be used otherwise. `-v' `--verbose' Cause Automake to print information about which files are being read or created. `--version' Print the version number of Automake and exit.  File: automake.info, Node: configure, Next: Top level, Prev: Invoking Automake, Up: Top Scanning `configure.in' *********************** Automake scans the package's `configure.in' to determine certain information about the package. Some `autoconf' macros are required and some variables must be defined in `configure.in'. Automake will also use information from `configure.in' to further tailor its output. Automake also supplies some Autoconf macros to make the maintenance easier. These macros can automatically be put into your `aclocal.m4' using the `aclocal' program. * Menu: * Requirements:: Configuration requirements * Optional:: Other things Automake recognizes * Invoking aclocal:: Auto-generating aclocal.m4 * Macros:: Autoconf macros supplied with Automake * Extending aclocal:: Writing your own aclocal macros  File: automake.info, Node: Requirements, Next: Optional, Prev: configure, Up: configure Configuration requirements ========================== The simplest way to meet the basic Automake requirements is to use the macro `AM_INIT_AUTOMAKE' (*note Macros::.). But if you prefer, you can do the required steps by hand: * Define the variables `PACKAGE' and `VERSION' with `AC_SUBST'. `PACKAGE' should be the name of the package as it appears when bundled for distribution. For instance, Automake defines `PACKAGE' to be `automake'. `VERSION' should be the version number of the release that is being developed. We recommend that you make `configure.in' the only place in your package where the version number is defined; this makes releases simpler. Automake doesn't do any interpretation of `PACKAGE' or `VERSION', except in `Gnits' mode (*note Gnits::.). * Use the macro `AC_ARG_PROGRAM' if a program or script is installed. *Note Transforming Program Names When Installing: (autoconf)Transforming Names. * Use `AC_PROG_MAKE_SET' if the package is not flat. *Note Creating Output Files: (autoconf)Output. * Use `AM_SANITY_CHECK' to make sure the build environment is sane. * Call `AC_PROG_INSTALL' (*note Particular Program Checks: (autoconf)Particular Programs.). * Use `AM_MISSING_PROG' to see whether the programs `aclocal', `autoconf', `automake', `autoheader', and `makeinfo' are in the build environment. Here is how this is done: missing_dir=`cd $ac_aux_dir && pwd` AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir) AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir) AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir) AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir) AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir) Here are the other macros which Automake requires but which are not run by `AM_INIT_AUTOMAKE': `AC_OUTPUT' Automake uses this to determine which files to create (*note Creating Output Files: (autoconf)Output.). Listed files named `Makefile' are treated as `Makefile's. Other listed files are treated differently. Currently the only difference is that a `Makefile' is removed by `make distclean', while other files are removed by `make clean'.  File: automake.info, Node: Optional, Next: Invoking aclocal, Prev: Requirements, Up: configure Other things Automake recognizes ================================ Automake will also recognize the use of certain macros and tailor the generated `Makefile.in' appropriately. Currently recognized macros and their effects are: `AC_CONFIG_HEADER' Automake requires the use of `AM_CONFIG_HEADER', which is similar to `AC_CONFIG_HEADER' (*note Configuration Header Files: (autoconf)Configuration Headers.), but does some useful Automake-specific work. `AC_CONFIG_AUX_DIR' Automake will look for various helper scripts, such as `mkinstalldirs', in the directory named in this macro invocation. If not seen, the scripts are looked for in their `standard' locations (either the top source directory, or in the source directory corresponding to the current `Makefile.am', whichever is appropriate). *Note Finding `configure' Input: (autoconf)Input. FIXME: give complete list of things looked for in this directory `AC_PATH_XTRA' Automake will insert definitions for the variables defined by `AC_PATH_XTRA' into each `Makefile.in' that builds a C program or library. *Note System Services: (autoconf)System Services. `AC_CANONICAL_HOST' `AC_CHECK_TOOL' Automake will ensure that `config.guess' and `config.sub' exist. Also, the `Makefile' variables `host_alias' and `host_triplet' are introduced. See both *Note Getting the Canonical System Type: (autoconf)Canonicalizing, and *Note Generic Program Checks: (autoconf)Generic Programs. `AC_CANONICAL_SYSTEM' This is similar to `AC_CANONICAL_HOST', but also defines the `Makefile' variables `build_alias' and `target_alias'. *Note Getting the Canonical System Type: (autoconf)Canonicalizing. `AC_FUNC_ALLOCA' `AC_FUNC_GETLOADAVG' `AC_FUNC_MEMCMP' `AC_STRUCT_ST_BLOCKS' `AC_FUNC_FNMATCH' `AM_FUNC_STRTOD' `AC_REPLACE_FUNCS' `AC_REPLACE_GNU_GETOPT' `AM_WITH_REGEX' Automake will ensure that the appropriate dependencies are generated for the objects corresponding to these macros. Also, Automake will verify that the appropriate source files are part of the distribution. Note that Automake does not come with any of the C sources required to use these macros, so `automake -a' will not install the sources. *Note A Library::, for more information. Also, see *Note Particular Function Checks: (autoconf)Particular Functions. `LIBOBJS' Automake will detect statements which put `.o' files into `LIBOBJS', and will treat these additional files as if they were discovered via `AC_REPLACE_FUNCS'. *Note Generic Function Checks: (autoconf)Generic Functions. `AC_PROG_RANLIB' This is required if any libraries are built in the package. *Note Particular Program Checks: (autoconf)Particular Programs. `AC_PROG_CXX' This is required if any C++ source is included. *Note Particular Program Checks: (autoconf)Particular Programs. `AC_PROG_F77' This is required if any Fortran 77 source is included. This macro is distributed with Autoconf version 2.13 and later. *Note Particular Program Checks: (autoconf)Particular Programs. `AC_F77_LIBRARY_LDFLAGS' This is required for programs and shared libraries that are a mixture of languages that include Fortran 77 (*note Mixing Fortran 77 With C and C++::.). *Note Autoconf macros supplied with Automake: Macros. `AM_PROG_LIBTOOL' Automake will turn on processing for `libtool' (*note Introduction: (libtool)Top.). `AC_PROG_YACC' If a Yacc source file is seen, then you must either use this macro or define the variable `YACC' in `configure.in'. The former is preferred (*note Particular Program Checks: (autoconf)Particular Programs.). `AC_DECL_YYTEXT' This macro is required if there is Lex source in the package. *Note Particular Program Checks: (autoconf)Particular Programs. `AC_PROG_LEX' If a Lex source file is seen, then this macro must be used. *Note Particular Program Checks: (autoconf)Particular Programs. `ALL_LINGUAS' If Automake sees that this variable is set in `configure.in', it will check the `po' directory to ensure that all the named `.po' files exist, and that all the `.po' files that exist are named. `AM_C_PROTOTYPES' This is required when using automatic de-ANSI-fication; see *Note ANSI::. `AM_GNU_GETTEXT' This macro is required for packages which use GNU gettext (*note gettext::.). It is distributed with gettext. If Automake sees this macro it ensures that the package meets some of gettext's requirements. `AM_MAINTAINER_MODE' This macro adds a `--enable-maintainer-mode' option to `configure'. If this is used, `automake' will cause `maintainer-only' rules to be turned off by default in the generated `Makefile.in's. This macro is disallowed in `Gnits' mode (*note Gnits::.). This macro defines the `MAINTAINER_MODE' conditional, which you can use in your own `Makefile.am'. `AC_SUBST' `AC_CHECK_TOOL' `AC_CHECK_PROG' `AC_CHECK_PROGS' `AC_PATH_PROG' `AC_PATH_PROGS' For each of these macros, the first argument is automatically defined as a variable in each generated `Makefile.in'. *Note Setting Output Variables: (autoconf)Setting Output Variables, and *Note Generic Program Checks: (autoconf)Generic Programs.  File: automake.info, Node: Invoking aclocal, Next: Macros, Prev: Optional, Up: configure Auto-generating aclocal.m4 ========================== Automake includes a number of Autoconf macros which can be used in your package; some of them are actually required by Automake in certain situations. These macros must be defined in your `aclocal.m4'; otherwise they will not be seen by `autoconf'. The `aclocal' program will automatically generate `aclocal.m4' files based on the contents of `configure.in'. This provides a convenient way to get Automake-provided macros, without having to search around. Also, the `aclocal' mechanism is extensible for use by other packages. At startup, `aclocal' scans all the `.m4' files it can find, looking for macro definitions. Then it scans `configure.in'. Any mention of one of the macros found in the first step causes that macro, and any macros it in turn requires, to be put into `aclocal.m4'. The contents of `acinclude.m4', if it exists, are also automatically included in `aclocal.m4'. This is useful for incorporating local macros into `configure'. `aclocal' accepts the following options: `--acdir=DIR' Look for the macro files in DIR instead of the installation directory. This is typically used for debugging. `--help' Print a summary of the command line options and exit. `-I DIR' Add the directory DIR to the list of directories searched for `.m4' files. `--output=FILE' Cause the output to be put into FILE instead of `aclocal.m4'. `--print-ac-dir' Prints the name of the directory which `aclocal' will search to find the `.m4' files. When this option is given, normal processing is suppressed. This option can be used by a package to determine where to install a macro file. `--verbose' Print the names of the files it examines. `--version' Print the version number of Automake and exit.  File: automake.info, Node: Macros, Next: Extending aclocal, Prev: Invoking aclocal, Up: configure Autoconf macros supplied with Automake ====================================== `AM_CONFIG_HEADER' Automake will generate rules to automatically regenerate the config header. If you do use this macro, you must create the file `stamp-h.in' in your source directory. It can be empty. `AM_ENABLE_MULTILIB' This is used when a "multilib" library is being built. A "multilib" library is one that is built multiple times, once per target flag combination. This is only useful when the library is intended to be cross-compiled. The first optional argument is the name of the `Makefile' being generated; it defaults to `Makefile'. The second option argument is used to find the top source directory; it defaults to the empty string (generally this should not be used unless you are familiar with the internals). `AM_FUNC_STRTOD' If the `strtod' function is not available, or does not work correctly (like the one on SunOS 5.4), add `strtod.o' to output variable `LIBOBJS'. `AM_FUNC_ERROR_AT_LINE' If the function `error_at_line' is not found, then add `error.o' to `LIBOBJS'. `AM_FUNC_MKTIME' Check for a working `mktime' function. If not found, add `mktime.o' to `LIBOBJS'. `AM_FUNC_OBSTACK' Check for the GNU obstacks code; if not found, add `obstack.o' to `LIBOBJS'. `AM_C_PROTOTYPES' Check to see if function prototypes are understood by the compiler. If so, define `PROTOTYPES' and set the output variables `U' and `ANSI2KNR' to the empty string. Otherwise, set `U' to `_' and `ANSI2KNR' to `./ansi2knr'. Automake uses these values to implement automatic de-ANSI-fication. `AM_HEADER_TIOCGWINSZ_NEEDS_SYS_IOCTL' If the use of `TIOCGWINSZ' requires `', then define `GWINSZ_IN_SYS_IOCTL'. Otherwise `TIOCGWINSZ' can be found in `'. `AM_INIT_AUTOMAKE' Runs many macros that most `configure.in''s need. This macro has two required arguments, the package and the version number. By default this macro `AC_DEFINE''s `PACKAGE' and `VERSION'. This can be avoided by passing in a non-empty third argument. `AM_PATH_LISPDIR' Searches for the program `emacs', and, if found, sets the output variable `lispdir' to the full path to Emacs' site-lisp directory. `AM_PROG_CC_STDC' If the C compiler in not in ANSI C mode by default, try to add an option to output variable `CC' to make it so. This macro tries various options that select ANSI C on some system or another. It considers the compiler to be in ANSI C mode if it handles function prototypes correctly. If you use this macro, you should check after calling it whether the C compiler has been set to accept ANSI C; if not, the shell variable `am_cv_prog_cc_stdc' is set to `no'. If you wrote your source code in ANSI C, you can make an un-ANSIfied copy of it by using the `ansi2knr' option (*note ANSI::.). `AM_PROG_LEX' Like `AC_PROG_LEX' with `AC_DECL_YYTEXT' (*note Particular Program Checks: (autoconf)Particular Programs.), but uses the `missing' script on systems that do not have `lex'. `HP-UX 10' is one such system. `AM_SANITY_CHECK' This checks to make sure that a file created in the build directory is newer than a file in the source directory. This can fail on systems where the clock is set incorrectly. This macro is automatically run from `AM_INIT_AUTOMAKE'. `AM_SYS_POSIX_TERMIOS' Check to see if POSIX termios headers and functions are available on the system. If so, set the shell variable `am_cv_sys_posix_termios' to `yes'. If not, set the variable to `no'. `AM_TYPE_PTRDIFF_T' Define `HAVE_PTRDIFF_T' if the type `ptrdiff_t' is defined in `'. `AM_WITH_DMALLOC' Add support for the dmalloc (ftp://ftp.letters.com/src/dmalloc/dmalloc.tar.gz) package. If the user configures with `--with-dmalloc', then define `WITH_DMALLOC' and add `-ldmalloc' to `LIBS'. `AM_WITH_REGEX' Adds `--with-regex' to the `configure' command line. If specified (the default), then the `regex' regular expression library is used, `regex.o' is put into `LIBOBJS', and `WITH_REGEX' is defined.. If `--without-regex' is given, then the `rx' regular expression library is used, and `rx.o' is put into `LIBOBJS'.  File: automake.info, Node: Extending aclocal, Prev: Macros, Up: configure Writing your own aclocal macros =============================== The `aclocal' program doesn't have any built-in knowledge of any macros, so it is easy to extend it with your own macros. This is mostly used for libraries which want to supply their own Autoconf macros for use by other programs. For instance the `gettext' library supplies a macro `AM_GNU_GETTEXT' which should be used by any package using `gettext'. When the library is installed, it installs this macro so that `aclocal' will find it. A file of macros should be a series of `AC_DEFUN''s. The `aclocal' programs also understands `AC_REQUIRE', so it is safe to put each macro in a separate file. *Note Prerequisite Macros: (autoconf)Prerequisite Macros, and *Note Macro Definitions: (autoconf)Macro Definitions. A macro file's name should end in `.m4'. Such files should be installed in `$(datadir)/aclocal'.  File: automake.info, Node: Top level, Next: Programs, Prev: configure, Up: Top The top-level `Makefile.am' *************************** In non-flat packages, the top level `Makefile.am' must tell Automake which subdirectories are to be built. This is done via the `SUBDIRS' variable. The `SUBDIRS' macro holds a list of subdirectories in which building of various sorts can occur. Many targets (e.g. `all') in the generated `Makefile' will run both locally and in all specified subdirectories. Note that the directories listed in `SUBDIRS' are not required to contain `Makefile.am's; only `Makefile's (after configuration). This allows inclusion of libraries from packages which do not use Automake (such as `gettext'). The directories mentioned in `SUBDIRS' must be direct children of the current directory. For instance, you cannot put `src/subdir' into `SUBDIRS'. In a deep package, the top-level `Makefile.am' is often very short. For instance, here is the `Makefile.am' from the GNU Hello distribution: EXTRA_DIST = BUGS ChangeLog.O README-alpha SUBDIRS = doc intl po src tests It is possible to override the `SUBDIRS' variable if, like in the case of GNU `Inetutils', you want to only build a subset of the entire package. In your `Makefile.am' include: SUBDIRS = @SUBDIRS@ Then in your `configure.in' you can specify: SUBDIRS = "src doc lib po" AC_SUBST(SUBDIRS) The upshot of this is that Automake is tricked into building the package to take the subdirs, but doesn't actually bind that list until `configure' is run. Although the `SUBDIRS' macro can contain configure substitutions (e.g. `@DIRS@'); Automake itself does not actually examine the contents of this variable. If `SUBDIRS' is defined, then your `configure.in' must include `AC_PROG_MAKE_SET'. The use of `SUBDIRS' is not restricted to just the top-level `Makefile.am'. Automake can be used to construct packages of arbitrary depth. By default, Automake generates `Makefiles' which work depth-first (`postfix'). However, it is possible to change this ordering. You can do this by putting `.' into `SUBDIRS'. For instance, putting `.' first will cause a `prefix' ordering of directories.  File: automake.info, Node: Programs, Next: Other objects, Prev: Top level, Up: Top Building Programs and Libraries ******************************* A large part of Automake's functionality is dedicated to making it easy to build programs and libraries. * Menu: * A Program:: Building a program * A Library:: Building a library * LIBOBJS:: Special handling for LIBOBJS and ALLOCA * A Shared Library:: Building a Libtool library * Program variables:: Variables used when building a program * Yacc and Lex:: Yacc and Lex support * C++ Support:: * Fortran 77 Support:: * Support for Other Languages:: * ANSI:: Automatic de-ANSI-fication * Dependencies:: Automatic dependency tracking  File: automake.info, Node: A Program, Next: A Library, Prev: Programs, Up: Programs Building a program ================== In a directory containing source that gets built into a program (as opposed to a library), the `PROGRAMS' primary is used. Programs can be installed in `bindir', `sbindir', `libexecdir', `pkglibdir', or not at all (`noinst'). For instance: bin_PROGRAMS = hello In this simple case, the resulting `Makefile.in' will contain code to generate a program named `hello'. The variable `hello_SOURCES' is used to specify which source files get built into an executable: hello_SOURCES = hello.c version.c getopt.c getopt1.c getopt.h system.h This causes each mentioned `.c' file to be compiled into the corresponding `.o'. Then all are linked to produce `hello'. If `PROG_SOURCES' is needed, but not specified, then it defaults to the single file `prog.c'. Multiple programs can be built in a single directory. Multiple programs can share a single source file, which must be listed in each `_SOURCES' definition. Header files listed in a `_SOURCES' definition will be included in the distribution but otherwise ignored. In case it isn't obvious, you should not include the header file generated by `configure' in an `_SOURCES' variable; this file should not be distributed. Lex (`.l') and Yacc (`.y') files can also be listed; see *Note Yacc and Lex::. Automake must know all the source files that could possibly go into a program, even if not all the files are built in every circumstance. Any files which are only conditionally built should be listed in the appropriate `EXTRA_' variable. For instance, if `hello-linux.c' were conditionally included in `hello', the `Makefile.am' would contain: EXTRA_hello_SOURCES = hello-linux.c Similarly, sometimes it is useful to determine the programs that are to be built at configure time. For instance, GNU `cpio' only builds `mt' and `rmt' under special circumstances. In this case, you must notify Automake of all the programs that can possibly be built, but at the same time cause the generated `Makefile.in' to use the programs specified by `configure'. This is done by having `configure' substitute values into each `_PROGRAMS' definition, while listing all optionally built programs in `EXTRA_PROGRAMS'. If you need to link against libraries that are not found by `configure', you can use `LDADD' to do so. This variable actually can be used to add any options to the linker command line. Sometimes, multiple programs are built in one directory but do not share the same link-time requirements. In this case, you can use the `PROG_LDADD' variable (where PROG is the name of the program as it appears in some `_PROGRAMS' variable, and usually written in lowercase) to override the global `LDADD'. If this variable exists for a given program, then that program is not linked using `LDADD'. For instance, in GNU cpio, `pax', `cpio' and `mt' are linked against the library `libcpio.a'. However, `rmt' is built in the same directory, and has no such link requirement. Also, `mt' and `rmt' are only built on certain architectures. Here is what cpio's `src/Makefile.am' looks like (abridged): bin_PROGRAMS = cpio pax @MT@ libexec_PROGRAMS = @RMT@ EXTRA_PROGRAMS = mt rmt LDADD = ../lib/libcpio.a @INTLLIBS@ rmt_LDADD = cpio_SOURCES = ... pax_SOURCES = ... mt_SOURCES = ... rmt_SOURCES = ... `PROG_LDADD' is inappropriate for passing program-specific linker flags (except for `-l' and `-L'). So, use the `PROG_LDFLAGS' variable for this purpose. It is also occasionally useful to have a program depend on some other target which is not actually part of that program. This can be done using the `PROG_DEPENDENCIES' variable. Each program depends on the contents of such a variable, but no further interpretation is done. If `PROG_DEPENDENCIES' is not supplied, it is computed by Automake. The automatically-assigned value is the contents of `PROG_LDADD', with most configure substitutions, `-l', and `-L' options removed. The configure substitutions that are left in are only `@LIBOBJS@' and `@ALLOCA@'; these are left because it is known that they will not cause an invalid value for `PROG_DEPENDENCIES' to be generated.  File: automake.info, Node: A Library, Next: LIBOBJS, Prev: A Program, Up: Programs Building a library ================== Building a library is much like building a program. In this case, the name of the primary is `LIBRARIES'. Libraries can be installed in `libdir' or `pkglibdir'. *Note A Shared Library::, for information on how to build shared libraries using Libtool and the `LTLIBRARIES' primary. Each `_LIBRARIES' variable is a list of the libraries to be built. For instance to create a library named `libcpio.a', but not install it, you would write: noinst_LIBRARIES = libcpio.a The sources that go into a library are determined exactly as they are for programs, via the `_SOURCES' variables. Note that the library name is canonicalized (*note Canonicalization::.), so the `_SOURCES' variable corresponding to `liblob.a' is `liblob_a_SOURCES', not `liblob.a_SOURCES'. Extra objects can be added to a library using the `LIBRARY_LIBADD' variable. This should be used for objects determined by `configure'. Again from `cpio': libcpio_a_LIBADD = @LIBOBJS@ @ALLOCA@  File: automake.info, Node: LIBOBJS, Next: A Shared Library, Prev: A Library, Up: Programs Special handling for LIBOBJS and ALLOCA ======================================= Automake explicitly recognizes the use of `@LIBOBJS@' and `@ALLOCA@', and uses this information, plus the list of `LIBOBJS' files derived from `configure.in' to automatically include the appropriate source files in the distribution (*note Dist::.). These source files are also automatically handled in the dependency-tracking scheme; see *Note Dependencies::. `@LIBOBJS@' and `@ALLOCA@' are specially recognized in any `_LDADD' or `_LIBADD' variable.