gettext
The following diagram summarizes the relation between the files
handled by GNU gettext and the tools acting on these files.
It is followed by a somewhat detailed explanations, which you should
read while keeping an eye on the diagram. Having a clear understanding
of these interrelations would surely help programmers, translators
and maintainers.
Original C Sources ---> PO mode ---> Marked C Sources ---.
|
.---------<--- GNU gettext Library |
.--- make <---+ |
| `---------<--------------------+-----------'
| |
| .-----<--- PACKAGE.pot <--- xgettext <---' .---<--- PO Compendium
| | | ^
| | `---. |
| `---. +---> PO mode ---.
| +----> tupdate -------> LANG.pox --->--------' |
| .---' |
| | |
| `-------------<---------------. |
| +--- LANG.po <--- New LANG.pox <----'
| .--- LANG.gmo <--- msgfmt <---'
| |
| `---> install ---> /.../LANG/PACKAGE.mo ---.
| +---> "Hello world!"
`-------> install ---> /.../bin/PROGRAM -------'
The indication `PO mode' appears in two places in this picture, and you may safely read it as merely meaning "hand editing", using any editor of your choice, really. However, for those of you being the lucky users of GNU Emacs, PO mode has been specifically created for providing a cosy environment for editing or modifying PO files. While editing a PO file, PO mode allows for the easy browsing of auxiliary and compendium PO files, as well as following references into the set of C program sources from which PO files has been derived. It has a few special features, among which the interactive marking of program strings as translatable, and the validatation of PO files with easy repositioning to PO file lines showing errors.
As a programmer, the first step into bringing GNU gettext
into your package is identifying, right in the C sources, which
strings are meant to be translatable, and which are untranslatable.
This tedious job can be done a little more comfortably using PO
mode, but you can use any means being usual to you for modifying your
C sources. Some other simple, standard changes are also needed to
properly initialize the translation library. See section Preparing Program Sources, for
more information about all this.
Once the C sources have been modified, the xgettext program
is used to find and extract all translatable strings, and create an
initial PO file out of all these. This `package.pot' file
contains all original program strings, it has sets of pointers to
exactly where in C sources each string is used, and all translations
are set to empty. The letter t in `.pot' marks that this is
a Template PO file, not yet oriented towards any particular language.
See section Invoking the xgettext Program, for more details about how one calls the
xgettext program. If you are really lazy, you might
be interested at working a lot more right away, and preparing the
whole distribution setup (see section The Maintainer's View). By doing so, you
spare typing the xgettext command yourself, as make
should now generate the proper things automatically for you!
The first time through, there is no `lang.po' yet, so the
tupdate step may be skipped and replaced by a mere copy of
`package.pot' to `lang.pox', where lang
represents the target language.
Then comes the initial translation of messages. Translation in itself is a whole matter, still exclusively meant for humans, and whose complexity far overwhelms the level of this manual. Nevertheless, a few hints are given in some other chapter of this manual (see section The Translator's View). You will also find there indications about how to contact translating teams, or becoming part of them, for sharing your translating concerns with others who target the same native language.
While adding the translated messages into the `lang.pox' PO file, if you do not have GNU Emacs handy, you are on your own for ensuring that your fully respect the PO file format, and quoting conventions (see section The Format of PO Files). This is surely not an impossible task, as this is the way many people handled PO files already for Uniforum or Solaris. On the other hand, using PO mode in GNU Emacs, most details of PO file format are taken care for you, but you have to acquire some familiarity with PO mode itself. Besides main PO mode commands (see section Main Commands), you should know how to move between entries (see section Entry Positioning), and how to handle untranslated entries (see section Untranslated Entries).
If some common translations have already been saved into a compendium PO file, translators may use PO mode for initializing untranslated entries from the compendium, and also save selected translations into the compendium, updating it (see section Using Translation Compendiums). Compendium files are meant to be exchanged between members of a given translation team.
Programs, or packages of programs, are dynamic in nature: users write bug reports and suggestion for improvements, maintainers react by modifying programs in various ways. The fact that a package has already been internationalized should not make maintainers shy of adding new strings, or modifying strings already translated. They just do their job the best they can. For the GNU Translation Project to work smoothly, it is important that maintainers do not carry translation concerns on their already loaded shoulders, and that translators be kept as free as possible of programmatic concerns.
The only concern maintainers should have is carefully marking new
strings are translatable, when they should be, and do not otherwise
worry about them being translated, as this will come in proper time.
Consequently, when programs and their strings are adjusted in various
ways by maintainers, and for matters usually unrelated to translation,
xgettext would construct `package.pot' files which are
evolving over time, so the translations carried by `lang.po'
are slowly fading out of date.
It is important for translators (and even maintainers) to understand that package translation is a continuous process in the lifetime of a package, and not something which is done once and for all at the start. After an initial burst of translation activity for a given package, interventions are needed once in a while, because here and there, translated entries become obsolete, and new untranslated entries appear, needing translation.
The tupdate program has the purpose of refreshing an already
existing `lang.po' file, by comparing it with a newer
`package.pot' template file, extracted by xgettext
out of recent C sources. The refreshing operation adjusts all
references to C source locations for strings, since these strings
move as programs are modified. Also, tupdate comments out as
obsolete, in `lang.pox', those already translated entries
which are no longer used in the program sources (see section Obsolete Entries. It finally discovers new strings and insert them in
the resulting PO file as untranslated entries (see section Untranslated Entries. See section Invoking the tupdate Program, for more information about what
tupdate really does.
Whatever route or means taken, the goal is obtaining an updated `lang.pox' file offering translations for all strings. When this is properly achieved, this file `lang.pox' may take the place of the previous official `lang.po' file.
The time mobility, or fluidity of PO files, is an integral part of the translation game, and should be well understood, and accepted. People resisting it will have a hard time participating in the GNU Translation Project, or will give a hard time to other participants! In particular, maintainers should relax and include all available PO files in their distributions, even if these have not recently been updated, without banging or otherwise trying to exert pressure on the translator teams to get the job done. The pressure should rather come from the community of users speaking a particular language, and maintainers should consider themselves fairly relieved of any concern about the adequacy of translation files. On the other hand, translators should reasonably try updating the PO files they are responsible for, while the package is undergoing pretest, prior to an official distribution.
Once the PO file is complete and dependable, the msgfmt program
is used for turning the PO file into a machine-oriented format, which
may yield efficient retrieval of translations by the programs of the
package, whenever needed at runtime (see section The Format of GNU MO Files). See section Invoking the msgfmt Program, for more information about all modalities of execution
for the msgfmt program.
Finally, the modified and marked C sources are compiled and linked
with the GNU gettext library, usually through the operation of
make, given a suitable `Makefile' exists for the project,
and the resulting executable is installed somewhere users will find it.
The MO files themselves should also be properly installed. Given the
appropriate environment variables are set (see section Magic for End Users), the
program should localize itself automatically, whenever it executes.
The remaining of this manual has the purpose of deepening the various steps outlined in this section.
Go to the first, previous, next, last section, table of contents.